Hi everyone: I have assembled a 2300c board/frame into a 280c lower case/2300c upper case with a 280c screen. The computer has two issues, otherwise it works perfectly. Problem 1: if the computer is started or restarted while an ac adapter is plugged in the screen will not light up. If the adapter is unplugged the screen will immediately light up, the adapter can then be plugged back in and the screen works normally. Even though the screen does not light up until the adapter is momentarily removed the computer starts up normally and the lcd is displaying the process without backlight. Problem 2: the screen will not adjust it's brightness level, it is always on at full brightness. This screen did work perfectly in a 280c. When the light level adjustment buttons are pushed the brightness scale pops on the screen and goes up or down, but the lcd remains fully bright at all times. I'd appreciate your ideas/feedback on these issues. Pat L ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
