Trishan Arul on 6/1/01 12:16 AM wrote:
> Hi folks - I have a problem that I can't quite figure out. I just bought a
> 2300c but can't seem to get it to work in my Duo Dock II. When I insert it,
> nothing happens, when I turn it on using the keyboard or the back of the
> dock, the dock starts up and the monitor lights up but the Duo doesn't start
> (I do get chimes though?).
>
> My older 280 works fine in that setup, when I insert it, the Duo boots right
> up. Is there some kind of control panel or some other setting I need to
> know about? THanks.
>
There is nothing to set up when using in the Dock. It should function just
as the 280 does.
What you describe sounds like it cant find a boot drive at start up. Do you
get a blinking question mark?
Does the 2300 start up OK outside the Dock when using the battery or AC?
How is the 2300 configured (i.e. OS, RAM, drive size)?
Have you tried resetting the PRAM? This is done by removing the AC and
battery, then holding down the power/restart button on the back for about 45
seconds. Then reinsert battery, AC and try booting.
-makmac
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
