>I'm using a 2300c with OS 8.6. Everything runs very smoothly, but both >Apple's Express Modem and GV's PowerPort Mercury default to 'compatible' >mode during the startup sequence which means I always have to go to the >control panel to reset them to 'normal' mode before using the serial port. > >Does anyone know what might be causing this and whether there's any way >around it? The Energy Saver control panel in OS 8.5 and later causes this problem. Remove it and replace it with the Powerbook control panel from 8.1 to solve it. You will lose the Energy Saver's ability to put "processor cycling" on different settings between battery and wall power, but the other power management stuff will still work. -- Marc Sira | [EMAIL PROTECTED] "If you can't play with words, what good are they?" ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
