> I am probably soon going to put a Newer card in my 2400. While it is apart, > I'm also going to put in a larger hard drive. Will the powerbook boot off a > system without the nupower extension? With the Newer G3 installed and no extensions, you will get a "cache error warning". However, this shouldn't stop you from booting fully. >I don't have the floppy mod. You can get the extensions here: http://eshop.macsales.com/Tech/index.cfm?load=newertech.html > All the other G3 upgrades that I've done retain the stock processor and just > boot the normal cpu, where as the 2400 motherboard is removed and replaced. Only the CPU daughter card is replaced, not the motherboard, although you will still have to disassemble the motherboard. Hope this helps. Jack ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
