I am going to put the following up for sale on ebay. If anyone wants
anything before I put it up on ebay then email me with a reasonable
offer.
Duo2300 40mb/1.2gb, with duo dock plus, ethernet transceiver, mac color
display, apple extended keyboard and adb mouse II, duo power adapter.
-in fantastic condition, the battery charge is so-so, the screen is
perfect, the trackpad perfect, Duo dock has no problems works well.
Duo 280c 24mb/240 mb screen is perfect, trackball is newly replaced,
battery charge is so-so, comes with power adapter, won't start up
without power adapter plugged in.
duo 280 16mb /320mb, this machine has some problems, the screen
brightness turns on if you play around with the power adapter, the
battery is again so-so, but this machine won't turn on with out a power
adapter. The machine has a perfect screen, and would be useful for
anyone who already has a duo, or has a dock since I don't have a power
adapter for it.
other stuff
2 apple minidock
newer ethernet microdock
8 mb memory
12 mb memory
320 scsi hard drive
trakcball mechanism
color brightness control button mechanism
powerport 19.2 modem
duodock plus with bad power supply
SCSI Zip drive
I will mix and match almost anything
Kishi
On Monday, July 16, 2001, at 03:51 PM, Kris Feldmann wrote:
> From the Readme, it sounds like the LocalTalk Bridge will do what I
> want: allow a user on the Duo to access a TCP/IP network by bridging
> through another computer which is on the TCP/IP network. It looks like
> it would work if it understood the Duo's serial port. I think what you
> are describing below is not what I want (nor what the original poster
> wants) to do.
>
> Kris Feldmann
>
> Thus wrote "Scott Holder" <[EMAIL PROTECTED]>:
>> Date: Fri, 13 Jul 2001 22:53:02 -0400
>> From: "Scott Holder" <[EMAIL PROTECTED]>
>> To: <[EMAIL PROTECTED]> (Duo/2400 List)
>> Subject: [Duo2400] Re: ethernet for duo 2300?
>>
>> You'll need to load the bridge on an intermediate computer, not the
>> duo. For
>> example, on my setup I put the bridge on the LC 475. It connects the
>> duo to
>> the other machine transparently. You'll need to make sure the
>> Appletalk on
>> the intermediate computer is set to Ethernet.
>>
>> Scott Holder
>>
>> ----- Original Message -----
>> From: "Kris Feldmann" <[EMAIL PROTECTED]>
>> To: "Duo/2400 List" <[EMAIL PROTECTED]>
>> Sent: Friday, July 13, 2001 8:40 PM
>> Subject: [Duo2400] Re: ethernet for duo 2300?
>>
>>
>>> The LocalTalk Bridge control panel won't load on the Duo. It
>>> complains that the printer port is in use. It doesn't seem
>>> to understand the Duo's shared Modem/Printer port.
>>>
>>>
>>> Kris Feldmann
>>>
>>> Thus wrote "Scott Holder" <[EMAIL PROTECTED]>:
>>>> Date: Fri, 13 Jul 2001 20:16:27 -0400
>>>> From: "Scott Holder" <[EMAIL PROTECTED]>
>>>> To: <[EMAIL PROTECTED]> (Duo/2400 List)
>>>> Subject: [Duo2400] Re: ethernet for duo 2300?
>>>>
>>>> Cool, I'd be interested in hearing the results. You'll probably need
>>>> to
>> set
>>>> both the duo and the bridge to use Appletalk/MacIP in TCP IP. You'll
>>>> probably also want to give the bridge, the Duo, and whatever machine
>> you're
>>>> connecting to IPs in the same range (10.0.0.1, 10.0.0.2, etc), and
>> you'll
>>>> need a proxy on the main machine. On the duo, you'll probably want to
>> set
>>>> the router address to the bridge, and the bridge set the router
>>>> address
>> to
>>>> whatever the main machine's IP is.
>>>>
>>>> This is all theory, I haven't tried it and it's as likely to not
>>>> work as
>>>> work :) My curiosity is getting the better of me again....
>>>>
>>>> Scott Holder
>>>> ----- Original Message -----
>>>> From: "Kris Feldmann" <[EMAIL PROTECTED]>
>>>> To: "Duo/2400 List" <[EMAIL PROTECTED]>
>>>> Sent: Friday, July 13, 2001 8:08 PM
>>>> Subject: [Duo2400] Re: ethernet for duo 2300?
>>>>
>>>>
>>>>> I downloaded the bridge... I'll try it and see if I can use TCP/IP
>>>>> stuff over the bridge.
>>>>>
>>>>>
>>>>> Kris Feldmann
>>>>>
>>>>> Thus wrote "Scott Holder" <[EMAIL PROTECTED]>:
>>>>>> Date: Fri, 13 Jul 2001 19:58:21 -0400
>>>>>> From: "Scott Holder" <[EMAIL PROTECTED]>
>>>>>> To: <[EMAIL PROTECTED]> (Duo/2400 List)
>>>>>> Subject: [Duo2400] Re: ethernet for duo 2300?
>>>>>>
>>>>>> Do what exactly? :)
>>>>>>
>>>>>> I just took my LC III (later upgraded to an LC475), added a cheap
>>>>>> LC
>> PDS
>>>>>> Ethernet card, and then installed the Localtalk bridge available
>>>>>> for
>>>> free
>>>>>> from Apple on it. From there, I plugged the Ethernet into my PC or
>>>> PowerMac,
>>>>>> and then hooked my duo up to it through the LC's printer port.
>>>>>> Then,
>> I
>>>> could
>>>>>> share files between the PowerMac or PC transparently. I had some
>> limited
>>>>>> success with internet stuff, but haven't gone too far with it. I
>> don't
>>>> see
>>>>>> why it shouldn't work if the TCP/IP on the LC is set to
>> Appletalk/MacIP.
>>>>>> I'll have to try it when I get home tonight :)
>>>>>>
>>>>>> Hope this is at all useful :)
>>>>>> Scott Holder
>>>>>
>>>
>>>
>
>
> ----------
> Duo/2400 List, The friendliest place on the Net!
> A listserv for users and fans of Mac subportables.
> FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
> Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
>
> To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
> To switch to the DIGEST mode, E-mail to <DuoList-
> [EMAIL PROTECTED]>
> Need help from a real person? Try. <DuoList-
> [EMAIL PROTECTED]>
>
> ----------
> Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
> MPC-100 | <http://www.drbott.com/prod/mpc100.html>
>
> NineWire | If they are cool enough to host this list...
> Digital Solutions | ...you should check them out!
> http://www.NineWire.com/
>
> Midwest Mac Parts ][ <http://www.midwestmac.com>
> After-market parts for Macs. ][ 888-356-1104 ][
>
> MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
> Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
>
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
