HI everyone, thanks for the answers.
>key seems to be pressed all the time! have you ever had something like this? >>Try reseating the keyboard cables. >>Mad Dog this is what I will do next. >> Try loosening up the screws holding the keyboard. If they are too >>tight, they will do this. >>Paul I tried this first because I remembered that from the well-known JBs Duo FAQ and disassemble instructions. But it did not help. >>I have had keyboards where it was the screw tightness, some a loose >>connector, a few needed a good whack on the back and/or a good cleaning, >>and two where it seemed that between corrosion and whatever else, they >>just stopped working after sitting for a while. >> >>-steve Ok, I will do all this although I fear that the corrosion I saw on that option key may be the reason for its malfunction. I might have to get a new keyboard... thanks for your help - mathis ------------------------------------------- Mathis Groendahl [EMAIL PROTECTED] ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
