Tom
Thanks much for your detailed answer!  After you said that my Asante 
Localtalk-to-Ethernet adapter doesn't support TCP/IP, of course I went, 
"Duh!" and slapped my forehead!  Ok, so I'll have to keep my eyes out for a 
free, or next-to-nothing deal on one of those mini Ethernet docks.  I've seen 
them around (even on this list), but can't afford $100 or so for one right 
now.  It isn't a huge priority, just a nicety.

Thanks again and Happy New Year!
Mike

In a message dated 12/28/01 11:44:59 PM, [EMAIL PROTECTED] 
writes:

<< ------------------------------


Date: Fri, 28 Dec 2001 13:56:15 -0500

Subject: [Duo2400] Re: TCP/IP + DHCP on Duo 280c?

From: Tom Rymes <[EMAIL PROTECTED]>

Message-Id: <[EMAIL PROTECTED]>


On Friday, December 28, 2001, at 12:12  PM, [EMAIL PROTECTED] wrote:


> PROBLEM:

> Can't get my Duo 280c to get onto the Internet through my Ethernet 

> network + router + cable modem.


[snip]


> connected through an Asante LocalTalk-to-Ethernet adapter.   I hooked 

> up another PhoneNet-style LocalTalk connector to the 280c's 

> printer/modem port, then chained that to the LocalTalk connector on the 

> DeskWriter.  I can see my printers and server through the Chooser, so I 

> know the connection is correct for that.  Obviously, this Mac doesn't 

> have Ethernet built-in (and don't own a EtherDock), so the AppleTalk CP 

> shows no choices other than the Serial/Modem port.  I do have a Dock II 

> with an Ethernet card in it, but I'd like to get this going without 

> that.


Well, here's the simple answer: The Asante Localtalk-to-Ethernet adapter 

only supports the Appletalk protocol. It does not support TCP/IP. 

Therein lies your problem. You have three solutions (Unless someone 

knows of a fourth):


1.) Use the dock II to connect via Ethernet. This will allow you to run 

TCP/IP

2.) Buy any dock with a SCSI port and an Asante EN/SC SCSI to Ethernet 

adapter. This will allow you to connect to Ethernet without a full-size 

dock. (Though it will work with any dock that has a SCSI connection.) 

The following docks have SCSi ports

    - Duo Dock I, II, and Plus

    - NewerTech SCSI microdock

    - NewerTech Ultradock 16sc & 16sce (the sce has built-in ethernet, too)

    - Apple minidock

    - E-Machines Etherdock (This dock has built-in Ethernet, too.)

3.) Buy a dock with built-in Ethernet. The following docks have built-in 

Ethernet:

    - Duo Dock I through a NuBus Ethernet card (So it isn't technically 

built-in)

    - Duo Dock II & Plus (Built-in)

    - E-Machines Etherdock (though some 280s and all 2300s seem to have 

problems with this dock. 280s and   2300s often freeze whenever 

sending any amount of upstream data over the ethernet port.)

    - NewerTech Ultradock 16sce (note the 'e')

    - NewerTech Ethernet Microdock

    - Asante Netdock


Also, you ought to upgrade to Open transport, if only for the ease of 

TCP/IP configuration. (Though DHCP might obviate that). IMHO, unless you 

use a program that is incompatible with OT, you ought to upgrade.


HTH,


Tom >>


----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>

To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try.  <[EMAIL PROTECTED]>

----------
Dr. Bott  | 10/100 Ethernet for your 2400 is finally here!
MPC-100   | <http://www.drbott.com/prod/mpc100.html>

  RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler 
  CoolPad at Staples. Both in white for iBooks at <http://roadtools.com>

Midwest Mac Parts  ][  <http://www.midwestmac.com>  
After-market parts  for Macs.   ][  888-356-1104 ][

MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! 
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>

Reply via email to