At 10:23 PM -0700 9/25/2003, Christoph Pistor wrote:
>I swapped the HD in my PB180c and now I can start up! However, it only
>works when the PB is connected via SCSI to a Zip drive which in turn is
>connected to my Performa 6400. If I disconnect the SCSI cable, I can
>only start from a floppy. Using Disk First aid or the utility does not
>let me see my internal disk. However, when running with the SCSI cable
>attached I am sure its starting from the internal disk. What could be
>the problem?
I'd back everything up on the 6400, and then use that disktools
floppy software to reformat the drive. You could have done the same thing
with the first hard drive.
Paul
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler
CoolPad at Staples. Both in white for iBooks at <http://roadtools.com>
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
