--- Bon Davis <[EMAIL PROTECTED]> wrote:
> I was also looking for the disk tools floppy disk
> image for a 2400 
> that had a newer finder on it so i could access HFS+
> volumes
> I think it was a 8.1 NOT 7.X image that was needed.

Yes, you must have at least 8.1 to access HFS+
volumes. There are 8.1 Disk Tools floppies for 68040
and for PPC.

FYI, 68k Macs upgraded with 601 CPUs can boot from
an 8 or 8.1 PPC Disk Tools floppy without needing an
enabler. For 7.6 they only need an enabler for the
Disk Tools floppy. For 7.5.x they need the enabler
always. Daystar did not support anything less than
7.5 on their 601 upgrades which usually shipped with
that System version. Dunno about Apple's 601 upgrades
except they never sold any for 030 Macs. The Apple
601 upgrade control panel will only disable a
card like the Turbo 601 then refuse to enable it
because the base Mac is an 030 CPU.

=====
"You never have to repair or replace what you leave out of the design."
William "Bill" Powell Lear, inventor of the 8-Track tape and the Learjet.

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/

----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>

To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try.  <[EMAIL PROTECTED]>

----------
Dr. Bott  | 10/100 Ethernet for your 2400 is finally here!
MPC-100   | <http://www.drbott.com/prod/mpc100.html>

  RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler 
  CoolPad at Staples. Both in white for iBooks at <http://roadtools.com>

Midwest Mac Parts  ][  <http://www.midwestmac.com>  
After-market parts  for Macs.   ][  888-356-1104 ][

MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! 
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>

Reply via email to