In a message dated 10/1/04 3:53:34 PM, [EMAIL PROTECTED] writes: << This leads me to my question. Is it possible to rebuild these batteries? Do any of you have experience with this? >>
Hello, Alex. Yes, it is possible to rebuild the batteries. The Type I batteries use standard "tabbed" AA cells (this refers to the size of the battery, the tabs are used to connect the cells with a soldering iron) and the Type II and III batteries use 4/5ths A cells. Sanyo makes such cells, and you can check locally at electronics shops to see who carries such cells. One suggestion is, if you have a Type I battery, to use the RC car battery packs...most of these are NiMH cells, around 1800 mAH and can be used to replace the cells in the Duo pack with some soldering work. The 4/5ths "A" cells are a bit harder to come by...I order mine from a US company at www.batteriesamerica.com. I cut the packs apart using a Dremel tool and reglue them with a urethane adhesive. Battery life is quite good when usi ng the higher capacity cells. Cheers; Andrew _______________________________________________ DuoList mailing list [EMAIL PROTECTED] http://listserver.themacintoshguy.com/mailman/listinfo/duolist
