http://webobjects.uwaterloo.ca/mac2400/ Hardware:Repair:GLOD
On Dec 1, 2004, at 4:18 PM, Tom and Lisa P wrote:
Balazs,
It sounds like you haven't tried to get rid of that death light yet, so you might not have any major problem. First thing I would try is to disconnect the a/c adapter and battery, and open up that little port protector door on the back of the laptop. Then, there's a tiny button you can press above the floppy drive port and the graphic denotes that with a power symbol (circle with an I in it). Push the button and hold it for a few seconds (some say up to 40 seconds). Then, plug in your battery and a/c adapter and try turning the machine on. If it's nothing major, you should be all set after doing that!
Morris
Ralph Mawyer, Jr. San Antonio, Texas
Associate Editor mac2400 http://www.sineware.com/mac2400 Your PowerBook 2400 Reference Site
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety". Benjamin Franklin, 1759.
_______________________________________________ DuoList mailing list [EMAIL PROTECTED] http://listserver.themacintoshguy.com/mailman/listinfo/duolist
