The cheaper way is to replace the backlight but a little experience is needed I did it with a powerbook 1400 LCD lamp (a bit longer but it fits) Someone in the list bought the lamp from digikey www.digikey.com (2mmx218mm ccfl)
Here's an extract from an old post by Donald McCaig: "One lamp. Very fragile, needs to be soldered at both ends. Disassembling the screen is fairly straight-forward and you needn't open the computer. Just unscrew the four screws in the case (see diagram in repair manual) and set to. The lamp's under the inverter board, the last thing to be disassembled." Sergio --- On Gioved�, 19 maggio 2005 21:31, Leigh Seaver <[EMAIL PROTECTED]> wrote: >I recently acquired a nice PB2400 which has no dead pixels, but >the backlight is not as bright as others I'm using. What is >the best way to correct this? New screen? Replace the backlight? If so, how >to do it? >_______________________________________________ >DuoList mailing list >[email protected] >http://listserver.themacintoshguy.com/mailman/listinfo/duolist > >Listmom is trying to clean out his closets! Vintage Mac and random stuff: > http://search.ebay.com/_W0QQsassZmacguy1984 > _______________________________________________ DuoList mailing list [email protected] http://listserver.themacintoshguy.com/mailman/listinfo/duolist Listmom is trying to clean out his closets! Vintage Mac and random stuff: http://search.ebay.com/_W0QQsassZmacguy1984
