In a message dated 9/5/05 5:03:06 AM, [EMAIL PROTECTED] writes:
>>My faithful 280c has suddenly gone wonky. When I boot it up, I get
>>the opening chimes, followed immediately by a loud
>>.....TICK-TICK-TICK.........TOCK-TOCK-TOCK..........TICK-TICK-TICK.........
>>that sounds as though it's coming from the speaker. Then,
>>absolutely nothing. No light on the screen, or anything.
Try unplugging the HD and see if it gets to the ? disk screen. If so, you've got a dead HD. If not, you may have a dead logic, and what you're hearing is the inverter section on the board trying to crank up.
Do pull the PRAM batt for awhile, reset the Power Manager (30-45 sec hold on reset btn on reverse, no AC, no battery) and try again. Might have just gone wonky.
I may have a 250 mg HD around here still, and I do have a good 280 logic, which will need an orig. clock chip reinstalled (currently hacked for 40 mhz....).
Andrew
_______________________________________________ DuoList mailing list [email protected] http://listserver.themacintoshguy.com/mailman/listinfo/duolist
Listmom is trying to clean out his closets! Vintage Mac and random stuff:
http://search.ebay.com/_W0QQsassZmacguy1984
