In a message dated 8/26/2007 12:28:51 P.M. Eastern Daylight Time, [EMAIL PROTECTED] writes:
I am attempting to install ox 10.0.3 on my little Comet (180mhz/80 meg ram). I do not have an external CD-Rom. I do have USB working on it and do have two working PCMCIA slots. What are my options here? Disk images are not seeming to work? I do have Xpostfacto, but it will not recognize.... Admirable project! It does not top the guy who installed OSX on a Mac 128k (It took A WEEK for the OS to register a cursor move!) but it gets points in MY book, FWIW... ------------------------------ I think your project would work best with at least 96mb RAM installed, and a G3 processor installed; albeit the G3 processor is hard to get these days, I know. Of course, there are SEVERAL SCSI cd-roms out there that will work with the 2400c; I think I have two by MediaWare and Sony, each with a extension driver. At one time it was very important for me to find a PCMCIA cd-rom for my 2400c -- I think I eventually found that the devices made by Addonics were the best way to go, as they made several cd-rom, dvd-rom and cd/dvd burners that were connectable either by USB, PCMCIA or (I think) firewire cables. Plus, they had classic Mac OS drivers. Help me out here list, but short of any reliable CD-rom connection, could not something be done to install OSX via SCSI Disk mode -- at least in tra nsporting the images to the HD of the 2400c? What about using an external HD via the 2400c's USB card? Good luck, Craig W. Houston Texas ************************************** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour
_______________________________________________ DuoList mailing list [email protected] http://listserver.themacintoshguy.com/mailman/listinfo/duolist
