At 7:54 PM -0800 1/24/08, Sis, Joseph C Jr 1LT NG NG NGB wrote:
I don't think that is the issue. The "official" maximum OS on my
Powerbook 2400c and my PowerMac 6500 are both 9.1. However 9.2.2
installed via OS9 Helper works great on both of those machines.
In this case the Duo is not even recognizing the hard drive during
startup. I can hear the HD spin up briefly and then immediately the
blinking disc icon comes up. I suspect the 2400 may require a
unique HD driver, because when I put a new HD in the 2400 it had to
be reformatted by the 2400 in order to work.
If you can boot from a CD try doing so then launch drive setup. I
think it includes the ability to update the disk driver. This is
NON-destructive, it doesn't hurt your data. I know some Apple disk
utility did this long ago (Pre-X) but I'm not positive which.
I could reformat this HD in the 2300, but I am reluctant to do so.
Also, it may not be possible, as when I use Disk Tools on the floppy
- it cannot 'see' the internal 1.13G HD.
That however sounds like a bad HD connection or such.
--
Clark Martin
Redwood City, CA, USA
Macintosh / Internet Consulting
"I'm a designated driver on the Information Super Highway"
_______________________________________________
DuoList mailing list
[email protected]
http://listserver.themacintoshguy.com/mailman/listinfo/duolist
