When the LC475 had a dead PRAM battery, we used to turn it on for 10
seconds or so, then turn it quickly off and back on again before
things stopped spinning, -worth a try.
On 27-Mar-09, at 9:55 AM, Hung Doan wrote:
So after all my complaints and pouting, I'm back on track trying to
get this 2400c working.
Good news: I got a new Powerboard and it seemed to help my 2400c
for a bit. Whenever I put my Comet to sleep, it'd wake up ready to
work and the battery fully works and all.
Bad news: After leaving it unplugged for one week, it won't power
on anymore. I do PMU reset (holding the button in the back)
overnight (not me, I used an object and fixed it against a book)
and it still doesn't power up.
Ugly: I thought I'd take out the battery and leave the plug in and
power on. Instead it sounds like it wants to turn on but it buzzes
for a few seconds, then fails to do anything.
What's going on? I think the Backup battery is tanked but shouldn't
the Powerbook battery still charge? I think the machine is confused
about how to charge and the battery is not charging. Any advice/
thoughts?
It doesn't have enough power to even get to GLOD I think :-) Anyhow
any advice is appreciated. Thanks!
Hung Doan
_______________________________________________
DuoList mailing list
[email protected]
http://listserver.themacintoshguy.com/mailman/listinfo/duolist
_______________________________________________
DuoList mailing list
[email protected]
http://listserver.themacintoshguy.com/mailman/listinfo/duolist
