Thanks for the input guys. I have 2 of these ezflyers and neither of them work with the new cable. They do work however with my 6100 in any SCSI configuration I throw at them so I don't believe it's a termination issue. Tried the new software, (which looks great BTW, thanks for the tip) still no go. It's got to be a bad cable but I wanted to try everything I could before sending it back. Thanks again, Andy ---------- > O.K., your Syquest has auto term sensing. It may not be functioning correctly. > The only way to check is to put an active terminator on the open pass through > port of the Syquest drive to see if that solves the problem. ------------------------------------------------------------------------- > > Do you have the latest(/last) utilities package from SyQuest? It sounds > like you're using an older package. The last/latest is available from > SyQuest's Web site > > <http://www.syquest.com/drivers> > > and should solve the problem. It's a pretty solid piece of work, although > it will ask that you redo your carts with older drivers to be certain that > all works as it should. ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> Dr. Bott LLC | Get a LapBottom with new �GRIPPIER� gripper pads! | http://www.drbott.com/prod/lapbot.html $23.00 Midwest Mac Parts <http://www.midwestmac.com> | After-market parts for Macs. Fix your ticking dock for $59 w/ trade-in of PS. 888-356-1104 PowerBook Guy is | Click here! Everything PowerBook! | http://www.powerbookguy.com
