I've had some problems with my ethernet card in both slots, and I've found
that the problem usually tends to be the card not seating itself in the
slot properly. The easiest way I've found to make sure it's in right is to
start up, then insert the card(w/dongle attached) then hit the card eject
button. Then, push the card back in.
I don't know if this is your problem, but I've had this happen with a modem
as well so it might be useful to someone...
Dan.
>I think one of my PC card slots, the lower one, has gone bad on my 2400c but
>it's weird. My ethernet card seems to work fine in either the top or lower
>slot. My Zoom V.90 card works fine in the top slot but it isn't recognized
>at all in the lower yielding a modem not responding error. My backup 33.6
>USR Cruise Card modem works fine in the top slot *and* works marginally in
>the lower slot--in the lower slot I get connections but it disconnects after
>a couple of minutes.
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
Dr. Bott LLC | Get a LapBottom with new �GRIPPIER� gripper pads!
| http://www.drbott.com/prod/lapbot.html $23.00
Midwest Mac Parts <http://www.midwestmac.com> | After-market parts
for Macs. Fix your ticking dock for $59 w/ trade-in of PS. 888-356-1104
PowerBook Guy is | Click here!
Everything PowerBook! | http://www.powerbookguy.com
