Hey folks, I've got a 280c that just won't recognize that a good battery in it has a charge. The charging 'lightning bolt' appears on the control strip but it says the battery is emtpy, and it stays saying that forever (well, a while). So it thinks a battery is there but can't tell that it's charged. I've reset the powermanager, the system is freshly installed (7.5.5), the battery and charger are good (tested on my 280). Ideas? It works fine on the AC adapter, just don't pull it out. This is a cobbled-together, beatup former 270c and the logic board was pretty much given to me by someone who was having lots of 'crashes' with it. So a hardware problem is a big possibility. It's also been previously taken apart by fumblefingered apes. When I put the 270 motherboard back in it's fine, by the way. Mark [EMAIL PROTECTED] ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> Dr. Bott LLC | Get a LapBottom with new �GRIPPIER� gripper pads! | http://www.drbott.com/prod/lapbot.html $23.00 Midwest Mac Parts <http://www.midwestmac.com> | After-market parts for Macs. Fix your ticking dock for $59 w/ trade-in of PS. 888-356-1104 PowerBook Guy is | Click here! Everything PowerBook! | http://www.powerbookguy.com
