Hi,
I posted this to the list a while ago, but maybe you missed it...
----- begin quote -----
Duo 230 with internal Express Modem and GB DAA.
British System 7.5.3
British Express Modem & Fax software version 1.5.4
Open Transport 1.1
FreePPP 2.6.2
The Express Modem control panel is set to "Use External Modem" (the default
I believe)
In FreePPP Setup I have created a new modem configuration called "Express
Modem" which I have configured as follows:
Connected to: Internal Modem
Port Speed: 57600 bps
Flow Control: CTS & RTS (DTR)
Dial Type: Tone
Speaker enabled: No
Hangup on disconnect: Yes
Performa internal modem: No
Long re-dial delay: No
Fast modem initialization: No
Modem init string settings:
Use: ATD&FM0
It seems to be the initialisation string that is the key to all of this and
this could probably be reduced to ATD&F (ATtention, Dial using default
Factory profile). The M0 simply disables the speaker, omitting this is the
same as M1 (default) which turns on the speaker until carrier is
established.
----- end quote -----
Michael
-----Original Message-----
From: Robert Gray [mailto:[EMAIL PROTECTED]]
Sent: 10 March 2000 01:15
To: Multiple recipients of DuoList
Subject: [Duo] Expresss Modem init
What is a good init string for FreePPP 2.6.2 for the Express Modem in
a 280c running OS 7.6.1?
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
X-Router | Share your DSL or cable modem between multiple computers!
Dr. Bott | <http://www.drbott.com/prod/MIH120.html>
PowerBook Guy is | Click here!
Everything PowerBook! | http://www.powerbookguy.com
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Reader Specials: 2.5GB Seagate SCSI: $119, 4GB IBM SCSI: $199,
Norton Util. 4.0: $29, Mac Parts, Systems & Repairs <http://www.macresq.com>
