Hi, I tested dvdrtools with a PIONEER DVD-RW DVR-105 burner.
[jackson:stock]:(~)$ dvdrecord --version dvdrtools v0.1.3 Portions (c) 2002-2003 Ark Linux <[EMAIL PROTECTED]> Based on: Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling I tested with the original Pioneer 4x DVD-R recordable which is inside the retail box : [jackson:root]:(/mnt/dvdrip)# dvdrecord -v dev=2,1,0 -dao takedown.raw dvdrtools v0.1.3 Portions (c) 2002-2003 Ark Linux <[EMAIL PROTECTED]> Based on: Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling TOC Type: 1 = CD-ROM scsidev: '2,1,0' scsibus: 2 target: 1 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version: 0 Response Format: 2 Capabilities: Vendor_info: 'PIONEER ' Identifikation: 'DVD-RW DVR-105 ' Revision: '1.21' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1605632 = 1568 KB FIFO size : 4194304 = 4096 KB Track 01: data 4291 MB Total size: 4928 MB (488:14.72) = 2197104 sectors Lout start: 4928 MB (488:16/54) = 2197104 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) Disk type: unknown Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 101392 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Performing OPC... Sending CUE sheet... dvdrecord: WARNING: Drive returns wrong startsec (0) using -150 Starting new track at sector: 0 Track 01: 4291 of 4291 MB written (fifo 100%). Track 01: Total bytes read/written: 4499668992/4499668992 (2197104 sectors). Writing time: 821.558s Fixating... Fixating time: 37.601s dvdrecord: fifo had 70875 puts and 70875 gets. dvdrecord: fifo was 0 times empty and 14350 times full, min fill was 89%. [jackson:root]:(/mnt/dvdrip)# Well this is quite good i think, this pioneer with firmware 1.21 seems to be the fastest kid in town. However i tested also with some cheaper recordables, the PRINCO DVD-R 1x,2x For Data & Video : [jackson:root]:(/mnt/dvdrip)# dvdrecord -v speed=1 dev=2,1,0 -dao takedown.raw dvdrtools v0.1.3 Portions (c) 2002-2003 Ark Linux <[EMAIL PROTECTED]> Based on: Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling TOC Type: 1 = CD-ROM scsidev: '2,1,0' scsibus: 2 target: 1 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version: 0 Response Format: 2 Capabilities: Vendor_info: 'PIONEER ' Identifikation: 'DVD-RW DVR-105 ' Revision: '1.21' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1605632 = 1568 KB FIFO size : 4194304 = 4096 KB Track 01: data 4291 MB Total size: 4928 MB (488:14.72) = 2197104 sectors Lout start: 4928 MB (488:16/54) = 2197104 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) Disk type: unknown Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 101392 Starting to write CD/DVD at speed 2 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Performing OPC... Sending CUE sheet... dvdrecord: WARNING: Drive returns wrong startsec (0) using -150 Starting new track at sector: 0 Track 01: 3672 of 4291 MB written (fifo 98%).dvdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 1C B1 6D 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 1C AE B1 0E 00 00 00 00 0C 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 1879729 (not valid) cmd finished after 0.005s timeout 200s write track data: error after 3851118592 bytes Sense Bytes: 70 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 Writing time: 1401.290s Fixating... Fixating time: 0.011s dvdrecord: fifo had 60723 puts and 60660 gets. dvdrecord: fifo was 0 times empty and 16517 times full, min fill was 90%. [jackson:root]:(/mnt/dvdrip)# This failing is quite reproducable on my system. 3 PRINCO recordables just failed. TIA Robert -- Robert M. Stockmann - RHCE Network Engineer - UNIX Consultant crashrecovery.org [EMAIL PROTECTED] _______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
