On Thu, 16 Jan 2003, Andr� Dalle wrote: > Hi, I have in my filesystem a 4.6GB '.nrg' image, which is apparently > from Nero Burning Rom. > > Is there any software out there to convert .nrg -> .iso so that I > might burn it with dvdrecord? > > An alternative is a program that could read and extract files from > a Nero image, which I could then re-image with mkisofs. > > Well, the last resort would be to take out the Pioneer A04 and install > it in a Windows machine that could run Nero.
Hi What i did is install vmware for linux and run a win2k prof guest machine. Install your Nero version inside that guest OS. Normally if the Pioneer A04 is secondary master ( /dev/hdc ) it would probably be likewise connected inside vmware's configuration editor. But then you get a VMware ATAPI CDROM, which won't be able to burn. What you do is, remove /dev/hdc from vmware and also make sure the module ide-cd.o is not loaded, but only ide-scsi.o and sg.o. With cat /proc/scsi/scsi you can see the Pioneer A04 show up as a scsi cdrom. Here's an example : [jackson:stock]:(~)$ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DDYS-T18350N Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: IBM Model: DDYS-T18350N Rev: S93E Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: IBM Model: DDYS-T18350N Rev: SA2A Type: Direct-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 03 Lun: 00 Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.13 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 04 Lun: 00 Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 05 Lun: 00 Vendor: HP Model: C1130A Rev: 3614 Type: Processor ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: PIONEER Model: DVD-ROM DVD-116 Rev: 1.09 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 01 Lun: 00 Vendor: PIONEER Model: DVD-RW DVR-105 Rev: 1.21 Type: CD-ROM ANSI SCSI revision: 02 In this list the PIONEER Model: DVD-RW DVR-105 is the 4th scsi cdrom player, so that would be /dev/scd3 . So inside the configuration editor of your vmware guest OS, remove /dev/hdc from the IDE Drives section. Then add /dev/scd3 inside the SCSI Devices section as e.g. SCSI 0:0 CD-ROM(raw access) and choose as name of the device /dev/scd3 . Inside win2k prof the new SCSI cdrom will show up as your real Pioneer A04 with all features available, which includes burning. Make sure to also install the Adaptec ASPI drivers. I did already do this for the Plextor CD-R PX-W1210S and i was able to burn with cdrwin. You might have a try with nero. Robert -- Robert M. Stockmann - RHCE Network Engineer - UNIX Consultant crashrecovery.org [EMAIL PROTECTED] _______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
