I am getting a similar almost identical error to Dominique Alessandri I am using a Sony DRU-500A with firmware 1.0g, which is the latest firmware as of today. I also have tried it with firmware 1.0e in the past.
My full results with dvdrecord are at the bottom of the email. 1. dvdrecord fails :( 2. cdrecord-ProDVD worked successfully. ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ 3. growisofs worked successfully. This is from the dvd+rw-tools package. # growisofs -Z /dev/scd0=testing.iso http://fy.chalmers.se/~appro/linux/DVD+RW/-RW/ I would like to help get dvdrecord working and would be willing to do some testing. If there is any testing or debugging I could do to help I would be willing to try. Thanks, John # dvdrecord -v speed=2 dev=2,0,0 -dao -data testing.iso scsidev: '2,0,0' scsibus: 2 target: 0 lun: 0 Linux sg driver version: 3.1.24 dvdrtools v0.1.3 Portions (c) 2002-2003 Ark Linux <[EMAIL PROTECTED]> Based on: Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'SONY ' Identifikation : 'DVD RW DRU-500A ' Revision : '1.0g' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 4718592 = 4608 KB FIFO size : 4194304 = 4096 KB Track 01: data 4303 MB Total size: 4942 MB (489:41.12) = 2203584 sectors Lout start: 4943 MB (489:43/09) = 2203584 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) Disk type: unknown Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 94912 Starting to write CD/DVD at speed 2 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Performing OPC... Sending CUE sheet... Starting new track at sector: 2203750 Track 01: 0 of 4303 MB written.dvdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 21 A0 66 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.010s timeout 200s Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 write track data: error after 0 bytes Writing time: 10.672s Fixating... Fixating time: 0.001s dvdrecord: fifo had 64 puts and 1 gets. dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. John Villalovos Intel Corporation 15400 NW GREENBRIER PKWY # CO5-162 BEAVERTON, OR 97006-5723 (503) 677-5777 Fax: (503) 677-6670 GPG 1.+/PGP 5.+/ DSS/Diffie Helman http://www.sodarock.com/JohnVillalovos-gpgkey.txt 1024D/1A25D86C 2F24 AD89 E5D5 C92B 7FE2 F878 7ED5 2D38 1A25 D86C My opinions are my own and NEVER the opinions of Intel Corporation. I am but a tiny, insignificant, infinitesimal (1/80000) cog in the giant machine of Intel :) _______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
