Hi Samat! On Sat, Mar 29, 2003 at 08:33:57PM -0700, Samat Jain wrote: > I've gotten my Sony DRX500ULX drive to burn discs in Linux. The > DRX500ULX is the external IEEE-1394/USB 2.0 version of the DRU500A, > pre-flashed with the 4x firmware. It's advertised to record both DVD+R/W > and DVD-R/W discs, along with regular CDs. > [...] > > cdrecord-ProDVD 2.0 doesn't work either. I get the error (when trying to > blank a prerecorded disc): > > WARNING: Phys disk size 2294800 differs from rzone size 0! Prerecorded disk? > WARNING: Phys start: 196608 Phys end 2491407 > Starting to write CD/DVD at speed 2 in real BLANK mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > cdrecord-ProDVD: Input/output error. blank unit: scsi sendcmd: no error > CDB: A1 00 00 00 00 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 02 7D 37 53 19 0A 00 00 00 00 30 00 00 00 > Sense Key: 0x2 Not Ready, Segment 0 > Sense Code: 0x30 Qual 0x00 (incompatible medium installed) Fru 0x0 > Sense flags: Blk 2100777753 (not valid) > cmd finished after 0.005s timeout 9600s > cdrecord-ProDVD: Cannot blank disk, aborting.
Further down in your message you write you have only tested DVD+RW disks, i.e. no DVD-RW. AFAIK, cdrecord-ProDVD currently only supports the DVD-R and DVD-RW flavor; that could explain while blanking failed. Anyway, thanks for sharing your experiences! Arndt -- Arndt Schoenewald <[EMAIL PROTECTED]>, Software Developer Quelltext AG (http://www.quelltext-ag.de), Dortmund, Germany _______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
