dvdrtools/cdrecord_prodvd users: I have a trial version of cdrecord-prodvd-2.01b29-sparc-sun-solaris2.6 running on a sparc Ultra 10 workstation with Solaris 2.6. I'm trying to burn a DVD on my Pioneer DVR-107 DVD-Burner. I get an error that suggests enabling DMA.
How do I enable DMA on an Ultra 10 sparc Solaris 2.6 box? I can't find anything on the Web including Sun's site that describes this. Thanks, -Guy Duplantier Here is the error that I get: >cdrecord-prodvd-2.01b29-sparc-sun-solaris2.6 -dummy -v -dao dev=0,2,0 speed=2 >driveropts=burnfree foo.iso /home/sysuser/guy/cdrecord-prodvd: No write mode specified. /home/sysuser/guy/cdrecord-prodvd: Asuming -tao mode. /home/sysuser/guy/cdrecord-prodvd: Future versions of cdrecord may have different drive dependent defaults. /home/sysuser/guy/cdrecord-prodvd: Continuing in 5 seconds... Cdrecord-ProDVD-Clone 2.01b29 (sparc-sun-solaris2.6) Copyright (C) 1995-2004 Jörg Schilling Unlocked features: Limited features: TOC Type: 1 = CD-ROM scsidev: '0,2,0' scsibus: 0 target: 2 lun: 0 Warning: Using USCSI interface. Using libscg version 'schily-0.8'. Driveropts: 'burnfree' SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-104 ' Revision : '1.20' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: DVD-R sequential recording Profile: DVD-RW sequential overwrite Profile: DVD-RW restricted overwrite Profile: DVD-R sequential recording (current) Profile: DVD-ROM Profile: CD-RW Profile: CD-R Profile: CD-ROM /home/sysuser/guy/cdrecord-prodvd: This version of cdrecord limits DVD-R/DVD-RW support to -dummy or 1 GB real. /home/sysuser/guy/cdrecord-prodvd: If you need full DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. /home/sysuser/guy/cdrecord-prodvd: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd). Driver flags : DVD MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R Drive buf size : 1638400 = 1600 KB FIFO size : 4194304 = 4096 KB Track 01: data 160 MB Total size: 160 MB = 81952 sectors Current Secsize: 2048 Total power on hours: 16208 Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2216544 Starting to write CD/DVD at speed 2 in dummy TAO mode for single session. Last chance to quit, starting dummy write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Starting new track at sector: 0 Track 01: 1 of 160 MB written (fifo 100%) [buf 64%] 1.4x./home/sysuser/guy/cdrecord-prodvd: I/O error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 03 26 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.006s timeout 100s write track data: error after 1650688 bytes /home/sysuser/guy/cdrecord-prodvd: The current problem looks like a buffer underrun. /home/sysuser/guy/cdrecord-prodvd: It looks like 'driveropts=burnfree' does not work for this drive. /home/sysuser/guy/cdrecord-prodvd: Please report. /home/sysuser/guy/cdrecord-prodvd: Make sure that you are root, enable DMA and check your HW/OS set up. Writing time: 46.459s Average write speed 2.6x. Fixating... Fixating time: 1.964s /home/sysuser/guy/cdrecord-prodvd: fifo had 90 puts and 27 gets. /home/sysuser/guy/cdrecord-prodvd: fifo was 0 times empty and 26 times full, min fill was 98%. _______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://lists.nongnu.org/mailman/listinfo/dvdrtools-users
