On Thu, 12 May 2005, James Carter wrote: > hi, all. > > since upgrading from linux kernel 2.4 to kernel 2.6 dvdrecord now fails > with the following error. i've tried with both ATA and ide-scsi > interfaces and it fails in exactly the same way, and it also fails on > two different DVD drives in different machines. > > a search through the mailing list indicate that this might be a drive > compatibility problem, but these drives did work prior to the change of > kernel. does anyone have any idea what might eb going wrong? > > thanks. > > > [EMAIL PROTECTED]:/tmp# dvdrecord -v dev=/dev/dvd speed=2 -dao -data > > /cdimage/cd.img dvdrtools v0.2.1 > > Portions (C) 2002-2005 Ark Linux <[EMAIL PROTECTED]> > > This program is free software; you can redistribute it and/or modify it > > under > > the terms of the GNU General Public License as published by the Free > > Software > > Foundation; either version 2, or (at your option) any later version. > > > > This program is distributed in the hope that it will be useful, but WITHOUT > > ANY > > WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS > > FOR > > A PARTICULAR PURPOSE. See the GNU General Public License for more details. > > > > You should have received a copy of the GNU General Public License along with > > this program; see the file COPYING. If not, write to the Free Software > > Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. > > Based on: > > Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling > > TOC Type: 1 = CD-ROM > > scsidev: '/dev/dvd' > > devname: '/dev/dvd' > > scsibus: -2 target: -2 lun: -2 > > Scanning device, b=4294967295 > > Linux sg driver version: 3.5.27 > > Using libscg version 'bero-0.5a' > > dvdrecord: Warning: using inofficial version of libscg (bero-0.5a > > '@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). > > atapi: 1 > > Device type : Removable CD-ROM > > Version : 0 > > Response Format: 2 > > Capabilities : > > Vendor_info : '_NEC ' > > Identifikation : 'DVD_RW ND-1300A ' > > Revision : '1.05' > > Device seems to be: Generic mmc2 DVD. > > Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). > > Driver flags : SWABAUDIO BURNFREE > > Supported modes: PACKET SAO > > Drive buf size : 1605632 = 1568 KB > > FIFO size : 4194304 = 4096 KB > > Track 01: data 4375 MB > > Total size: 5024 MB (497:48.22) = 2240117 sectors > > Lout start: 5025 MB (497:50/17) = 2240117 sectors > > Current Secsize: 2048 > > ATIP start of lead in: -150 (00:00/00) > > Disk type: unknown dye (reserved id code) > > Manuf. index: -1 > > Manufacturer: unknown (not in table) > > Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 58379 > > Starting to write CD/DVD at speed 2 in write mode for single session. > > Last chance to quit, starting real write in 0 seconds. Operation starts. > > Waiting for reader process to fill input buffer ... input buffer ready. > > trackno=0 > > BURN-Free is OFF. > > dvdrecord: Success. reserve track: scsi sendcmd: no error > > CDB: 53 00 00 00 00 00 22 2E 75 00 > > status: 0x2 (CHECK CONDITION) > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00 > > Sense Key: 0x5 Illegal Request, Segment 0 > > Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru > > 0x0 > > Sense flags: Blk 0 (not valid) > > cmd finished after 0.003s timeout 200s > > dvdrecord: Cannot open new session. > > dvdrecord: fifo had 64 puts and 0 gets. > > dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. >
Hi, You might try some commandline examples from this small HOWTO : http://crashrecovery.org/oss-dvd/HOWTO-ossdvd.html Regards, Robert -- Robert M. Stockmann - RHCE Network Engineer - UNIX/Linux Specialist crashrecovery.org [EMAIL PROTECTED] _______________________________________________ Dvdrtools-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/dvdrtools-users
