Hello,
I've got a 4165B, and I simply can not get it working.
uname -a: Linux borg 2.6.13.4-libata-asd-wifi #1 Sat Oct 15 13:22:36
CEST 2005 i686 GNU/Linux
If i disable ide-scsi, I get this:
[EMAIL PROTECTED]:/home/asd/dvdrtools-0.2.1# ./cdrecord/dvdrecord -dummy -dao
-v -eject
speed=2 dev=/dev/hdd ../filmek/The\ Siege\ -\ Szuksegallapot/The.Siege-Szuksega
llapot-MaMik.iso
dvdrtools v0.2.1
Portions (C) 2002-2005 Ark Linux <[EMAIL PROTECTED]>
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Scanning device, b=3
Linux sg driver version: 3.5.27
Using libscg version 'bero-0.5a'
./cdrecord/dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(
#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4165B'
Revision : 'DL03'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4425 MB
Total size: 5082 MB (503:29.57) = 2265718 sectors
Lout start: 5082 MB (503:31/43) = 2265718 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 32778
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Sending CUE sheet...
Starting new track at sector: 2265894
Track 01: 0 of 4425 MB written../cdrecord/dvdrecord: Success. write_g1: scsi s
endcmd: no error
CDB: 2A 00 00 22 93 26 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0C 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching qua
lifier] Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.002s timeout 200s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 10 00 00 00 0C 00 00 00 00 00 00
Writing time: 5.030s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.005s
./cdrecord/dvdrecord: fifo had 64 puts and 1 gets.
./cdrecord/dvdrecord: fifo was 0 times empty and 0 times full, min
fill was 100%.
If I use ide-scsi:
# dvdrecord -v -eject -dao dev=0,0,0 -data ./dirty\ dozen.iso
You should have received a copy of the GNU General Public License along with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.33
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4165B'
Revision : 'DL03'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4464 MB
Total size: 5127 MB (507:57.98) = 2285849 sectors
Lout start: 5127 MB (507:59/74) = 2285849 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 9255
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 2286022
Track 01: 4464 of 4464 MB written (fifo 100%).
Track 01: Total bytes read/written: 4681418752/4681418752 (2285849 sectors).
Writing time: 231.443s
Fixating...
Fixating time: 0.006s
dvdrecord: fifo had 73738 puts and 73738 gets.
dvdrecord: fifo was 6 times empty and 3875 times full, min fill was 0%.
The disc is completely unuseful... If I want to mount that disc, mount
fails, the error message is:
# mount /dev/dvd /mnt/dvdrom/ -t udf
mount: block device /dev/dvd is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/dvd,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
And I can see this in the log:
Oct 12 21:46:33 borg kernel: attempt to access beyond end of device
Oct 12 21:46:33 borg kernel: sr0: rw=0, want=68, limit=4
Oct 12 21:46:38 borg kernel: hdc: DMA disabled
Oct 12 21:46:39 borg kernel: hdc: ATAPI reset complete
Oct 12 21:46:59 borg kernel: scsi: Device offlined - not ready after
error recovery: host 0 channel 0 id 0 lun 0
Oct 12 21:46:59 borg kernel: sr0: CDROM (ioctl) error, command:
<6>Xdread, Read track info 52 01 00 00 00 02 00 00 08 00
Oct 12 21:46:59 borg kernel: Unrecognized sense data (in hex):
Oct 12 21:46:59 borg kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Oct 12 21:46:59 borg kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Oct 12 21:46:59 borg kernel: attempt to access beyond end of device
Oct 12 21:46:59 borg kernel: sr0: rw=0, want=1252, limit=4
Oct 12 21:46:59 borg kernel: attempt to access beyond end of device
Oct 12 21:46:59 borg kernel: sr0: rw=0, want=1028, limit=4
Oct 12 21:46:59 borg kernel: UDF-fs: No partition found (1)
Oct 12 21:46:59 borg kernel: scsi0 (0:0): rejecting I/O to offline device
I have no ideas, because this drive is ABLE to work with windows...
What could be the problem OR what else should I attach?
Daniel
--
Dániel Vásárhelyi
http://www.nsfw.hu/
_______________________________________________
Dvdrtools-users mailing list
Dvdrtools-users@nongnu.org
http://lists.nongnu.org/mailman/listinfo/dvdrtools-users
