Many Thanks.. This solved the problem completely. 73 Bruce N9BX
>From: Dave Henderson <[EMAIL PROTECTED]> >To: "Bruce Osterberg" <[EMAIL PROTECTED]>, [email protected] >Subject: Re: [Dx4win] RTTY Fields an PK232 >Date: Wed, 17 Apr 2002 03:34:20 +0000 > >Bruce > >x%M DE N9BX N9BX N9BX %M%D > >Should do the trick the letters after the % are case sensitive. > >If you go to <HELP><SEARCH FOR HELP ON...><FIND> and then put in <%>, you >will find all of the "control character" info. And don't forget it is case >sensitive. %M works %m doesn't. > >I put this out to everyone because it can be hard to find this info when >your not sure what your looking for , even I forget where the info is in >the help files sometimes and I use the RTTY commands a lot 8^). > > > >Dave >NR1DX > > > >At 08:55 PM 4/16/02 -0500, you wrote: >>Good Evening: >> >>I want to use the PK-232 with dx4win in the RTTY mode. I need to set up >>the function keys to One. Key the Radio and transmit Data, and than unkey >>the radio to listen.. EG (KEY) DE N9BX N9BX N9BX (Unkey) My problem is >>what do I put in the settings is it a % sign and what is the command, I >>know dumb as I can get it to work with writelog. Thanks a Million. >> >>Bruce N9BX >> >> >>_________________________________________________________________ >>Send and receive Hotmail on your mobile device: http://mobile.msn.com >> >>_______________________________________________ >>Dx4win mailing list >>[email protected] >>http://mailman.qth.net/mailman/listinfo/dx4win > _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
