Yes, I print directly on the cards. I export only the qso's that are marked for labels, print the labels in 5.02 (using the 5.03 country list) and then import these qso's b ack in 5.03 letting the new qso replace the old qso. It will tell you that it imported 0 qso's, but when you check, you will find that the qsl dates have been imported with the new dates. Works just fine for me printing on an Epson 2000P archive printer. I hope this will be fixed in the next release, but 5.02 seems to work just fine. I also had to remove the file for the qsl manager addresses as DX4WIN wants to print the address labels if you check the block to print the QSL Managers (KL7XXX via W5XXX).
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ralph Fedor Sent: Sunday, April 28, 2002 9:45 PM To: [email protected] Subject: [Dx4win] Bug in printing I've been unable to print QSL's for quite some time. Evidently there is a bug in 5.03 that will only allow one card to be printed in the landscape orientation. Each subsequent card is printed in portrait orientation which, of course, messes up the whole rest of the stack. Will this work? a.) Import my 5.03 log into an old 5.02 version. b.) Print my QSL's with the cards in landscape orientation. c.) Import the log back into 5.03 after printing. Will anything get fouled-up. Will all the changes transfer back into 5.03 afterwards? Or even better, does anyone know of any "bug fix" for this or a new version coming out that will take care of the problem? 73 - K0IR _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
