The 706, 706MKII, and 706MKIIG all have different default addresses. They can be changed in the rig menu. I'm not sure how DX4WIN handles this, but you should be aware in case it helps you solve your challenge. See http://www.qsl.net/wa9als/ICOM_HEX_ADDRESSES
(I use the 706MKIIG with WriteLog, but I use a different radio with DX4WIN, so I'm not familiar with how DX4WIN handles this radio.) ----- Original Message ----- From: "Mark Bastings" <[EMAIL PROTECTED]> To: "DX4WIN Reflector" <dx4win@mailman.qth.net> Sent: Sunday, August 04, 2002 5:00 PM Subject: [Dx4win] IC-706 MK II G > > Hello all, > > I have attempted to attach the above radio to my laptop and have had > some problems. > Hopefully someone who is familiar with the 706 can advise me on the > steps needed to set everything up. > > All I keep getting is an error message stating : "Radio timed out, radio > interface has been disabled". > > Any and all assistance will be appreciated. > > I sent this message previously using another address so hope it doesn't > go out twice. > > Thanks for your assistance!!! > > 73 de Mark (WU4Z) > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > >
