Kurt, Problem only occurs for Icom radios.
73, Larry, W0QE Kurt W. Zimmerman wrote: > I checked my Yaesu FT-920 for CW & CW-R and DX4WIN behaves normally. It > reads either CW mode as CW. I'm running the same version of DX4WIN. > > 73; > Kurt - W2MW > > -----Original Message----- > From: Larry Benko [SMTP:[EMAIL PROTECTED] > Sent: Tuesday, August 13, 2002 2:13 PM > To: [email protected] > Subject: [Dx4win] CW vs CW-R > > Just noticed that DX4Win ver 5.03 which I generally use with an Icom > 756Pro interprets the radio in CW mode as CW but if the radio is in > the CW-R mode then DX4Win interprets it as SSB mode. Same holds true > for RTTY. Radio in RTTY mode is interpreted as RTTY by DX4Win but > RTTY-R is interpreted by DX4Win as SSB. Can someone else verify this > anomoly? > > 73, > Larry Benko, W0QE > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win >
