You can try to assign the new port to be LPT2: * Right click on My Computer then select Properties.
* Click on the Hardware tab then the Device Manager button. * Expand Ports (COM & LPT) and find your LPT3 device. * Right click on the device then select Properties. * Click on the Port Settings tab. At the bottom should be an LPT Port Number box. * Change it to LPT2, then click on OK. Close all the dialogue boxes. You may need to reboot at this point. 73 - Jim AD1C At 10:00 AM 7/3/2002 +0100, Tony Lord wrote: >Hi there, can any one help me with a connection problem?? I am running >DX4WIN V 5.03, Arswin and ON4AOI's band decoder. Arswin and the band >decoder "talk" to the computer (Compaq XP device) via LPT ports. The >computer only came with one LPT port so I put a PCI card in for a second >LPT port. XP loaded the software called the port LPT3(??!!) and assigned >a 4 number address to it. Neither ARSWIN or the decoder will work with >it. However both work fine with the original LPT1 port (address 378H). -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.com
