Hi Mark, I have had my FT920 since ver. 4.x and am currently on 5.3 and I can't remember seeing this phenomenon. I have had on occasion where the rig seemed to lock up and had to re-boot the computer and shut off the radio to get them conversing again although this has been very rare over the years.
73, Todd WM8C's Ham Links & More http://wm8c.0catch.com http://www.angelfire.com/mi2/wm8c http://www.qsl.net/wm8c ----- Original Message ----- From: "Mark Endorf" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, March 18, 2002 8:07 PM Subject: [Dx4win] Band/mode tracking > Just an observation that I thought I would share. > I noticed sometime after trying to work the Ducie operation split on 15M, > the frequency and mode in "real time logging" were not being displayed in > DX4WIN correctly. Using an FT-920 with VFO A on the receive frequency, and > VFO B on my transmit frequency, I would periodically change bands on the > receive VFO to check on the other Ducie station. > At the end of the evening DX4WIN only showed 15M SSB, no mater what band, > mode, or VFO combination I tried. I had to correct several QSO's by memory, > that all were logged as 15M-SSB. It got fixed by turning the rig and > computer off, then back on again. > Anyone else seen this? DX4WIN or FT-920 problem? > Mark - WA0MHJ > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > >
