I have a question related to this. I own the Icom IC-756proII and using the radio settings for the 756pro works ok except I would like for it to not automatically default to filter 2 settings when you change frequencies. What command do I change in the .rig file to defeat this? I want the radio to stay on the filter setting I have already punched up manually.
Thanks Jay Gene A Williamson wrote: > > Using DX4WIN to set a frequency on CW with my IC-756, it automatically > selects the narrow (500 cps) filter. I've gone through the .RIG files, > comparing various ICOM radios, and here's the section that I revised ... > > [RC-Set Mode] > CSTR=060002FD > LEN=0 > LOC=Other > > By changing the first command line to CSTR=0600FD ... taking the "02" out > just before "FD" ... my rig now changes frequency while keeping the wide CW > filter. It even changes to wide from narrow if the 500 was already selected > (very handy because lots of spots aren't right on the mark). > > I suppose this would work on the PRO and '765 and others with that same > command string, but as they say, YMMV. > > 73 Gene N7YW > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win -- Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] http://www.qsl.net/learc
