This happens to me too. But, in my case, it is because my preferences are set to not display band/mode combinations which are already confirmed (even lower than gray). I'll see the spot in the spot window, but when it comes back from the PacketCluster, it disappears.
Could this be the case here? John, K2CIB ----- Original Message ----- From: "Donald McCoy" <[EMAIL PROTECTED]> To: "dx4win-digest" <dx4win@mailman.qth.net> Sent: Wednesday, December 03, 2003 9:57 PM Subject: [Dx4win] Spot Xfer/Vanish!? > Lately when I spot a DX station on the Packet window it comes up fine. BUT > most times it does not go to the DX Spots by Time window. NOW, I have seen > it go to the By Time window and then DISAPPEAR!! Honest! It had worked > fine on KØMP cluster here in Metro Denver but KØMP shut down about 6 months > ago. (Actually when KØMP was out of town he would shut down the backbone and > then spots did not transfer. He did that so it would not hang up the system > in case of trouble while he was gone.) I then joined N7US cluster which is > in AZ. Jim, N7US and I discussed this problem and he says it is probably a > DX4WIN anomaly. Jim said he checked his end and it looks fine. I am running > DX4WIN Ver 4.05 with a WIN 98SE program. I have checked my preference > settings and read the info on Packet in both my Ver. 1.11 and Ver. 4.0 > manuals and did not see any references made to this problem. > Any help appreciated! > 73, > Don WØDM > Littleton, CO > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
