I am running DX4WIN under XP and it works fine with most LPT ports... In my case it didn't work with the drivers for my Lava LPT2 board... so I put the printer on it and use the imbedded MB port (LPT1) without problem...
----- Original Message ----- From: "Teemu S Korhonen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <dx4win@mailman.qth.net> Sent: Tuesday, February 04, 2003 08:49 Subject: SV: [Dx4win] Windows 2000 Professional > > Alan, and everybody else. > > I can recommend you to upgrade your system to WIN2K, I am running it > here and it works great together with DX4WIN, BUT! You can not use the > Parallel port (LPT) for CW with your transceiver. I have a MarkV here > which I computer control via COM1, I have built a simple interface for > doing CW on the same cable as computer control. > > Otherwise DX4WIN is running smoothly on all my "computers". (They all > have WIN2K) > > 73, cu in the pileups. > > Teemu, SM0WKA - SM0W > > -----Ursprungligt meddelande----- > Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > För n5pa > Skickat: den 3 februari 2003 23:44 > Till: dx4win@mailman.qth.net > Ämne: [Dx4win] Windows 2000 Professional > > > I am currently running Windows 98 SE on my P4 system and as expected > have all kinds of problems. I have Windows 2000 Professional and would > like to upgrade to that rather than XP Pro. Are there any known > glitches with Win2k? I use a W1WEF Model 3 CW Interface on my LPT port. > I also use a Byte-Runner 4-port Serial card. I am extremely computer > literate (30 years in the business), but want to know any experience > with DX4WIN. > > 73's > Alan, N5PA > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
