Hello Gentlemen,
I noticed a problem with 6.02 tonight that has me puzzled. When double
clicking on a packet spot with a split the Kenwood TS-950SDX does not go ito
split mode. Both of the VFOs are set to the correct frequency but the radio
does not use the normal A for receive and B for transmit. Again, the
frequencies are set in the radio correctly and when manually selecting the B
vfo the correct QSX frequency is there. I went back to 5.03 and the problem
disappeared - it worked perfectly. I went back and forth several times with
the same results.
I then tried it with my TS-440S/AT and it did exactly the the same thing.
I am using the driver Kenwood 850-950 but tried the stright Kenwood driver and
the results were the same.
My operating system for all tests is Windows XP Pro on a pentium III 450 MHz.
BTW, I used the same cable and IF-232C for all testing also.
Anyone have any ideas??
73, Tom
=====
Tom LeClerc, Amateur Radio Station W1TJL
(past calls WB1CBY, /VE8, /VE1, /VO8)
LeClerc Consulting
email: [EMAIL PROTECTED]
PC/Network Consulting
__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com
