Wayne; I did this 1 month ago.
You can look at the errors with F8, and fix them , but with 137K you wont be keen to do this, for some reason !! Ouch ! I had 12 K errors at that point. Most of them are due to frequency - from memory, Logplus uses 1.832 MHZ, for example, but I think the import assumes this was 1832; and throws up an error!! I solved the problem by exporting the LogPlus log to BV (QSL card program by DF3CB) firstly; and then exporting this into ADIF. This solves ALL of the frequency error problems. A word of warning - dependent on what info you have in LogPlus - All my IOTA refs got screwed up, because I was stupid and let DX4WIN default the values !!! For example, if I worked a G, and entered an IOTA ref of EU120; when I did the ADIF import, it reset this to EU005, which cover 99% of G's !! I think that there was an option on import that leaves them as they are set. You should do this. Hope it works ok Wayne. It is a good programme; I am glad that I made the switch ! 73 Dave G3NKC (op and QSL Manager for MD4K / MD6V) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Wayne F. King Sent: 04 January 2003 13:38 To: dx4win Subject: [Dx4win] Newbie to DX4WIN Hi Folks, I just got DX4WIN and I need to import my data from LogPlus V4. Anyone out there have experience with DX4WIN/LogPlus ? I have tried but I get 137K errors. So if you have a solution maybe you could help me out. NHY, Wayne N2WK _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
