Hello Jeff, I'm also using Avery 8160 but I'm using the J8160 version. They are not similar in size. Are you sure you are using 8160 and not J8160 ? Just an idea...
73, Philippe ----- Original Message ----- From: "Jeff Maass" <[EMAIL PROTECTED]> To: "DX4WIN Mailing List" <[email protected]> Sent: Sunday, January 05, 2003 2:27 AM Subject: [Dx4win] QSL Labels and Avery 8160 Labels > > After getting all my recent PJ2/K8ND 160m QSOs imported to > DX4WIN, I'm printing QSL info labels for the first time. I am > using DX4WIN with a HP Deskjet 990Cse printer and Avery > 8160 labels. > > I'm having a problem that doesn't seem specifically related to > DX4WIN, but to something else in setting up for these labels. > Perhaps someone can share similar experiences and > solutions? > > From Word (Office 2000) or DX4WIN, the labels do not align > with the labels on the sheet. The first is off (too far down by 1/4-inch > or so), but they *all* seem spaced incorrectly relative to each > other, as if the 8160 template were wrong in both Word 2000 > *and* DX4WIN (I know - unlikely). Even if the first label were > aligned correctly, each subsequent rows would "walk" down, > with each label starting lower in the label space. > > There could be some misconfiguration of the printer, but I > would think that this should be handled by the printer driver > based on the template rather than requiring any kind of > manual setup? > > Any ideas? > > > Jeff Maass [EMAIL PROTECTED] Located near Columbus Ohio > USPSA # L-1192 NROI/CRO Amateur Radio K8ND > Maass' IPSC Resources: http://home.columbus.rr.com/jmaass/index.html > Circleville USPSA/IPSC: http://home.columbus.rr.com/jmaass/pcsiipsc.htm > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win
