Hi Kurt, Been running mine on DX4WIN for years with no problems so can't speak to the issue you raised (EPROM question) as I have not experienced it other than when I was on VFO B instead of VFO A. 73, Todd WM8C's Ham Links www.qsl.net/wm8c All outgoing emails scanned with NAV2002
----- Original Message ----- From: "Kurt W. Zimmerman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[email protected]> Sent: Saturday, July 05, 2003 7:16 PM Subject: [Dx4win] Can it be the 60m mod > I just recently performed the modification to my Yeasu FT 920 to operate on > 60m. All things seemed to be working just fine until I ran DX4WIN. Here > is the problem I face. I find a 17m CW spot. I click on the spot and the > radio responds, correct band/mode changes however the mode and band on the > QSO window starts at 17m CW then switches to 20m SSB. Something is > confused and I think it might be the radio. > > I'm just wondering if this is the infamous EPROM corruption that I've seen > on the reflector lately. > > If anyone has seen this and might have resolved this please let me know. > > 73; > Kurt - W2MW > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win >
