Lee, I know this is quite late, but I was saving some messages until I got 6.02 going and was ready to print labels directly onto QSL cards. I read your note and:
The 3rd line in the label report is for SWL cards only. I put "Thanks for the SWL report es 73, Dan" on that line. That is why it never printed. It does on SWL cards. 73, Dan KI6X -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jennings Sent: Monday, February 17, 2003 4:35 PM To: Bob Marzari; Dx4win Subject: Re: [Dx4win] Labels Hi Bob This is how I set my print up for directly printing onto the cards. I use the upper two lines on the PREFERENCES|REPORT/LABELS Tab and set it up as below: FT1000D, FT900, TL922, Yagis + Dipoles Tnx for the QSO es 73 && @@ It works for me. I tried using the third line on version 4.07 a few years ago but couldn't get it to play. Perhaps it works in the latest version? 73 Lee ZL2AL - ZL7AA, ZL8RI, ZL9CI, VE3OE In days of old, when radios were bold and transistors were not invented. The RF flew, the air was blue and seriously Ozone scented. . ----- Original Message ----- From: "Bob Marzari" <[EMAIL PROTECTED]> To: "Dx4win" <[email protected]> Sent: Tuesday, February 18, 2003 11:44 AM Subject: [Dx4win] Labels > Is there a way to add text such as my station description onto a label > generated by DX4WIN? I presently run the labels through the printer once > using MSWord and then again with DX4Win. > > Thanks > > Bob, W3PT > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
