Hello, I'm working with DX4Win 6.02, have the ARSWIn rotator connected to LPT 1, I have a Kenwood TS850 connected via IF232 to COM1, a FT-897 Yaesu via cat connected to COM 3 and a home made device connected to COM2 for digital mode (CW keying on RTS, PTT on DTR, ...).
So my station runs already fairly automatic. I encourage the two radio possibility but I was hoping that the program can select the right radio when a telnet dxcluster spot arrives and I click it. My FT897 is used for 144/440 Mhz SSB or sattelite and 50 Mhz SSB and the Kenwood for HF 1,8-30 Mhz. So when a dx spot enters the spotwindow, and I click it, can the program be told to select the correct radio according the bands that I use on it and make this radio active + set the right freq + mode ? If not, could this action be compiled into future versions, it would improve the automatisation in two radio stations a lot ... Next, Is it somehow possible to tell the program when using a rotator steering, that a certain antenna is mounted 90° off the other antennas direction. So that when this antenne (bands) are used, the rototor is directed to set for the exact direction ? Last, I have the callbook cdrom installed and by hitting F3 I get a window with information, is it possible to let the program fill in some field by default taking the information from that cdrom (f.e. state, county, name | location, locator ...) and how do I take information from the internet lookup ? I have the internet lookup activated, but this does not seems to work at all ? Thanks a lot for looking into my questions. Regards and 73, Phil, ON4VP
