Stan, 1. You can change the mode for the radio when selecting RTTY: See Fle | Databases | Radios | Select your radio Select the values tab Under mode values: look at SSB values, select RTTY and copy the first value (think this is LSB)
2. On the main form, under Radio: Select Ignore mode in real-time Enabling this will let you select RTTY, switch to LSB on the radio, but ignore the different mode when reading the radio. Hope this helps, Paul At 05:19 PM 10/6/03 -0400, Stan Staten wrote: >I am not sure if this is the right forum to ask, but since it >starts with DX4WIN, I will start here and be thankful for any >thoughts, including the forum I might find a solution. > > > >Setup > >FT-1000MP > >DX4WIN > >Any of the RTTY software packages interfacing AFSK to the XCVR > > > >Problem > >Click on a RTTY spot in DX4WIN and the radio is put in RTTY mode. >The problem is that the RTTY mode of this radio is FSK. I then >hit LSB to get it into LSB mode and work the contact. It is then >logged as SSB unless I push the RTTY button before completing the >logging operation. This becomes even more cumbersome if there is >split operation as I need to do the LSB thing, transfer the >setting to VFO B and then re-dial in the offset. > > > >Any suggestions on making FSK RTTY operation more convenient >would be appreciated. > > > >73 Stan, N3HS > > > > > > > >--- StripMime Report -- processed MIME parts --- >multipart/alternative > text/plain (text body -- kept) > text/html >The reason this message is shown is because the post was in HTML >or had an attachment. Attachments are not allowed. To learn how >to post in Plain-Text go to: http://www.expita.com/nomime.html --- >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
