Hi Jim, To see if telnet is working from your PC got to a command prompt. At the command prompt type "telnet na2na.net" (with out the quotes). This will let you know if telnet is working. This is my node here at the house. If that is working, create an entry in DX4Win for my node and then try to connect again. If that does work, you are all set..... If not then we have a base line...
let me know if that helps. Will NA2NA ----- Original Message ----- From: "James Jorgensen" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, September 01, 2003 5:43 PM Subject: [Dx4win] telnet problem? I run DX4WIN 5.03 on a computer with operating system Windows Me. I have encountered a problem getting DX spots via telnet. I can set TCP/IP in the preferences and then select an address in the Internet Connections menu, but nothing happens. I do not get connected. I have talked with others using DX4WIN and confirmed that all my settings in DX4WIN are correct. The problem must be with compatability of my version of DX4WIN with the WIndows Me operating system. Has anyone else encountered this problem? If so, how is it fixed? Please resond directly to me, as I am not a subscriber to the list. Thanks, Jim, K9RJ --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
