The default is fine, BUT if you wish to change the report to something other than 59, you have to hit the tab key after the second digit is entered, otherwise, for example a rstS 57, rstR 58 would become rstS 575 rstR 8 and then you have to start the report sequence over again, using the tab key or mouse clicking the next box after the rstS two digit report is manually entered. 73, -=Rog-K9RB=-
----- Original Message ----- From: "Darrell Earnshaw" <[EMAIL PROTECTED]> To: "Roger Borowski" <[EMAIL PROTECTED]> Cc: <Dx4win@mailman.qth.net> Sent: Tuesday, April 13, 2004 1:22 PM Subject: Re: [Dx4win] V 6.02 > Roger, > > I don't understand... > > > The other thing is that 3 digits are the default for report boxes regardless > > of mode. This should be mode/band dependent, especially for SSB on HF, where > > I constantly have to go and correct the rstS from 595 back to 59. Two years > > and I haven't gotten used to this which should only relate to the > > modes/bands where a three digit report is applicable. > > Are you saying that if you're working SSB that the default RST is "599" > rather than simply "59"? (Because, my version inserts the correct number > of digits based on mode.) Just curious. > > -- Darrell > >
