Even i have worked the YV0D on 20m (ssb and cw) the spots for yv0d in other bands are coloured yellow and 1st priority Is that ok or i am missing something. Kostas SV1DPIFrom etp.va at vawg.cap.gov Tue Aug 3 10:40:11 2004 From: [EMAIL PROTECTED] (Dir Prof. Dev. Va Wing, Maj. Roy D. Davis, Jr.) Date: Tue Aug 3 12:02:22 2004 Subject: [Dx4win] Missing Info in "State Window" Message-ID: <[EMAIL PROTECTED]>
I am having a problem with info not appearing coinciding correctly in the "State" Window and the "Listing" Window under reports. I worked a station in SD on 6M, on SSB and CW. I updated the log to show confirmation for both contacts. The information reflects Y for both contacts in the "Same Call" Window and Y in the Logbook Window.. But, the "State" Window reflects W for the SSB contact and C for the CW contact. Under "Reports" / Listing Window when brought up for 6 meters. The field for CW shows not worked, and SSB confirmed. When checking File, Preferences; Under Station the following are checked for 6 meters - Bands, modes-cw & ssb, vucc bands, grids, Under WAS the following are checked for 6 meters - Valid Bands, Separate Awards, Modes-cw & ssb Awards - mixed, mode, & band I have not noticed this problem until now, and wonder if there are other entries that may be problematic. Any help on how to get this problem resolved is appreciated. Thanks, Roy - WK4Y From [EMAIL PROTECTED] Tue Aug 3 14:27:55 2004 From: [EMAIL PROTECTED] (Roy Davis) Date: Tue Aug 3 14:30:00 2004 Subject: [Dx4win] Missing Info in State Window Message-ID: <[EMAIL PROTECTED]> I am having a problem with info not appearing coinciding correctly in the "State" Window and the "Listing" Window under reports. I worked a station in SD on 6M, on SSB and CW. I updated the log to show confirmation for both contacts. The information reflects Y for both contacts in the "Same Call" Window and Y in the Logbook Window.. But, the "State" Window reflects W for the SSB contact and C for the CW contact. Under "Reports" / Listing Window when brought up for 6 meters. The field for CW shows not worked, and SSB confirmed. When checking File, Preferences; Under Station the following are checked for 6 meters - Bands, modes-cw & ssb, vucc bands, grids, Under WAS the following are checked for 6 meters - Valid Bands, Separate Awards, Modes-cw & ssb Awards - mixed, mode, & band I have not noticed this problem until now, and wonder if there are other entries that may be problematic. Any help on how to get this problem resolved is appreciated. Thanks, Roy - WK4Y From [EMAIL PROTECTED] Tue Aug 3 17:17:11 2004 From: [EMAIL PROTECTED] (john paul) Date: Tue Aug 3 17:47:38 2004 Subject: [Dx4win] Re: Dade County Fl References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Jim, I apologize for starting something here; but, I find that a lot of my old cards have DADE on them and that is how they were entered. Now I have to go in and change all of them. They are all in ERROR..... Not only that, I have not been down there for over 20 years and was not aware that it was changed and they did not write me a letter or inform me that they were changing it. I think they owe the american public an apology for the oversight! hi hi..... 'Seriously now, I have it corrected and everything is working out fine. I just had to look for it. I even looked in my new "1995" Rand McNally Atlas and it shows DADE for the county name. I have not looked on any Florida maps as of yet; but, I wonder how many of them do not have the change listed. Just food for thought. One of those little glitches in life that we take for granted. Have fun, and thanks for the help. ----- Original Message ----- From: "Jim Reisert AD1C" <[EMAIL PROTECTED]> To: "john paul" <[EMAIL PROTECTED]> Cc: "dx4win" <[email protected]> Sent: Tuesday, August 03, 2004 10:44 AM Subject: Re: Dade County Fl > > --- john paul <[EMAIL PROTECTED]> wrote: > > > I am using the new upgrade to 6.03 and was entering > > counties into my log and DADE county Fl is not listed. > > The official name of the county is Miami-Dade, see: > > http://miamidade.gov/wps/portal > > 73 - Jim AD1C > > > ===== > Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 > USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.com > PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC From [EMAIL PROTECTED] Tue Aug 3 18:22:27 2004 From: [EMAIL PROTECTED] (Larry Benko) Date: Tue Aug 3 18:24:32 2004 Subject: [Dx4win] Re: Dade County Fl In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> John, Don't know what version you upgraded from but the Dade vs Miami-Dade is NOT the only county you may have problems with. Older versions of DX4Win has mistakes in Yuba, CA (Yuma in DX4Win), no Broomfield, CO (new county), and I think Harrison, WV was misspelled. If I am wrong about Harrison it definitely was one county in WV. I did exactly what you are doing now. I now can assure you that the current abbreviations are error free. 73, Larry, W0QE john paul wrote: >Jim, >I apologize for starting something here; but, >I find that a lot of my old cards have DADE on them >and that is how they were entered. Now I have to go in >and change all of them. They are all in ERROR..... > >Not only that, I have not been down there for over 20 >years and was not aware that it was changed and they >did not write me a letter or inform me that they were >changing it. I think they owe the american public an >apology for the oversight! hi hi..... > >'Seriously now, I have it corrected and everything is >working out fine. I just had to look for it. I even looked in >my new "1995" Rand McNally Atlas and it shows DADE >for the county name. I have not looked on any Florida maps >as of yet; but, I wonder how many of them do not have the >change listed. Just food for thought. One of those little >glitches in life that we take for granted. > >Have fun, and thanks for the help. > >----- Original Message ----- >From: "Jim Reisert AD1C" <[EMAIL PROTECTED]> >To: "john paul" <[EMAIL PROTECTED]> >Cc: "dx4win" <[email protected]> >Sent: Tuesday, August 03, 2004 10:44 AM >Subject: Re: Dade County Fl > > > > >>--- john paul <[EMAIL PROTECTED]> wrote: >> >> >> >>>I am using the new upgrade to 6.03 and was entering >>>counties into my log and DADE county Fl is not listed. >>> >>> >>The official name of the county is Miami-Dade, see: >> >> http://miamidade.gov/wps/portal >> >>73 - Jim AD1C >> >> >>===== >>Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 >>USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.com >>PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC >> >> >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win > > > From [EMAIL PROTECTED] Wed Aug 4 01:01:49 2004 From: [EMAIL PROTECTED] (Kostas SV1DPI) Date: Wed Aug 4 01:04:07 2004 Subject: [Dx4win] spot colours agn References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Yes ofcourse My qsos are Aves Isl. The strange is that even in same band and other mode are yellow and both of us (me and spotters use the 0 (zero) and not the O (oscar) Kostas SV1DPI ----- Original Message ----- From: "Duane A Calvin" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, August 03, 2004 9:48 PM Subject: Re: [Dx4win] spot colours agn Hello Kostas, Have you assured that YV0D is mapped to "Aves Island"? Once it is mapped, and you have it worked, all spots should show up as another color (i.e., worked, but not confirmed).... 73, Duane On Tue, 3 Aug 2004 01:30:36 +0300 "Kostas SV1DPI" <[EMAIL PROTECTED]> writes: > Even i have worked the YV0D on 20m (ssb and cw) > the spots for yv0d in other bands are coloured yellow and 1st > priority > Is that ok or i am missing something. > Kostas SV1DPI > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > Duane Calvin, AC5AA Austin, Texas
