I'm running DX4WIN version 6.03. I could have sworn that a while back I was able to get DX4WIN to communicate with my FT-817 and FT-857D, but now I can't figure out how. After switching the rig type to FT-1000MP (while using my 1000MP) I was unable to set the rig type to something that would work with my FT-857D. There appear to be no rig type settings for the 817 or 857D. Anyone know what rig setting will work (if any) with these two rigs? From [EMAIL PROTECTED] Sat Aug 7 14:54:24 2004 From: [EMAIL PROTECTED] (Stan Staten) Date: Sat Aug 7 14:53:34 2004 Subject: [Dx4win] Rig control for Yaesu FT-857 or FT-817 In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]>
I have been using it with the FT-897 and I think that is the same from a control basis as the 857. You might try it with the DX4WIN FT-897 settings. 73 Stan, N3HS -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of N6KJ Sent: Saturday, August 07, 2004 2:18 PM To: [email protected] Subject: [Dx4win] Rig control for Yaesu FT-857 or FT-817 I'm running DX4WIN version 6.03. I could have sworn that a while back I was able to get DX4WIN to communicate with my FT-817 and FT-857D, but now I can't figure out how. After switching the rig type to FT-1000MP (while using my 1000MP) I was unable to set the rig type to something that would work with my FT-857D. There appear to be no rig type settings for the 817 or 857D. Anyone know what rig setting will work (if any) with these two rigs? _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
