I have my rig control to my Yaesu FT-1000MP Mark-V and WriteLog CW = keying through COM1 via my W5XD Multi-Keyer. I have DX4WIN using COM8 via my RigBlaster Pro. DX4WIN will not key the Multi-Keyer. I run Windows XP = Pro on my P4 Dell. I use a ByteRunner Card with 8 COM Ports since the Dell = only has one COM Port. I do not see a way around two ports if you are = running XP unless you use one of the Parallel Port drivers to key via that port.
Alan, N5PA -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] = On Behalf Of VA3MW - Port Credit Sent: Friday, February 06, 2004 8:55 AM To: [email protected] Subject: Re: [Dx4win] Share rig COM port between Writelog and DX4WIN? Jim I doubt it, however You might be able to split the data coming out of the IC-756 and then = feed that to 2 level converters and use 2 unique com ports. I've never tried it, but it may be worth attempting. Mike VA3MW ----- Original Message -----=20 From: "Jim Reisert AD1C" <[EMAIL PROTECTED]> To: <[email protected]>; <[EMAIL PROTECTED]> Sent: Friday, February 06, 2004 9:30 AM Subject: [Dx4win] Share rig COM port between Writelog and DX4WIN? > Is it possible to effectively "split" a COM port (virtually or=20 > otherwise) so it's available to two different programs, like Writelog=20 > and DX4WIN? I'd like to be able for both programs to read the=20 > frequency from my IC-756 simultaneously. > > Thanks - Jim AD1C > > -- > Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 > USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.com > PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC > > _______________________________________________ > Dx4win mailing list > [email protected] http://mailman.qth.net/mailman/listinfo/dx4win > _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
