Hi Joe, there is file called "DXT2WIN.TXT" with step by step instruction in DXTelnet. I copied the following information from this file:
1) Start DXTelnet, go to "Configuration" menu then, "Links" and in the "Link to DXHUNTER" section set the "DXHUNTER installation path" string to: C:\DXTELNET\DXT4WIN\ Check the "Enable Link" check box, press "Save", quit and restart DXTelnet connecting to any site, for instance connect to CQDX-IRC. 2) Run C:\DXTELNET\DXT4WIN\DXT4WIN.EXE 3) Nothing special must be done at DX4WIN side. If DXTelnet is your unique spot source, set the packet port to "MSG". The link between DXTelnet and DX4WIN can now be two way (before it was ione way: DXT > DX4WIN): in DX4WIN, set the "message handshake" string to: ThunderRT5Form|DXTelnet<>DX4WIN You can also use any other port value and DXTelnet spots will still be analysed by DX4WIN together with the other spots coming from the port you've set. 73's Pawel, SP7PS http://sp7ps.pl http://shop.sp7ps.pl "Joe Young" wrote: > I seem to have lost the instructions for importing cluster spots from > DXTelnet. I used to have it set up that way and it worked fine. > (dx4w602) > > Thanks from Joe, W6RLL
