After downloading and installing 603 I get a error message "Port driver not found! Check appendix: Files for the correct drivers".
I looked in the drivers folder in Dx4win and both drivers are listed. Does anyone know what the procedure is to get the program to load these drivers ? I'm using Win/98 on this computer. Larry -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mailman.qth.net/pipermail/dx4win/attachments/20040515/114afa61/attachment.htm From [EMAIL PROTECTED] Sat May 15 15:46:20 2004 From: [EMAIL PROTECTED] (WC7N) Date: Sat May 15 16:01:55 2004 Subject: [Dx4win] LoTW problems References: <[EMAIL PROTECTED]><[EMAIL PROTECTED]><[EMAIL PROTECTED]><[EMAIL PROTECTED]><[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Don that is what I did under 6.02. When 6.03 hit the market I merged all of those entries into 6.03 without any problems. Also I have now unloaded logs and downloaded confirmed QSO's from LoTW with out any problems. Just is working great for me. Rod WC7N ----- Original Message ----- From: "Donald Eriksen" <[EMAIL PROTECTED]> To: "Ted Sarah - W8TTS" <[EMAIL PROTECTED]>; "Rick Murphy K1MU" <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Saturday, May 15, 2004 10:49 AM Subject: Re: [Dx4win] LoTW problems > Yes, Ted, the steps outlined by Paul worked here for the Samplelog. This > brings up a question I have: > > Do you folks that have done this to their log set up a special log just for > LoTW downloads? I'm real nervous about downloading into my present "clean" > log. Of course we all know it's foolproof and it won't foul up right? Oh > yeah. > > Sure sounds to me, after reading all these threads, that we need to wait > till after Dayton and maybe get some real instructions in the User's Guide > and Help file. Meanwhile, I may experiment, but not on my original log!! > > Don W6FFH > > > ----- Original Message ----- > From: "Ted Sarah - W8TTS" <[EMAIL PROTECTED]> > To: "Rick Murphy K1MU" <[EMAIL PROTECTED]> > Cc: <[email protected]> > Sent: Saturday, May 15, 2004 8:13 AM > Subject: Re: [Dx4win] LoTW problems > > > > Hi Rick, > > > > There was a thread going about this. And, a number of us were having a > > problem doing it. We weren't getting the same results Paul was getting. > > And, with Paul and Steve at Dayton, the thread has kind of stopped > > until he returns. But here is what he said to do... > > > > Paul van der Eijk wrote: > > > 1. Open samplelog.dxl > > > 2. File | Info; 5538 QSOs > > > 3. QSO | Filter Select upload = Y; no QSOs found > > > 4. Labels | Set upload flags; I get 5538 QSOs > > > 5. Labels | Export for LOTW (no filter or selection active) > > > 6. Takes no time it seems :) > > > 7. File new log (I'm not saving the modified log) > > > 8. File import (ADIF) I read 5538 QSOs > > > > Now, when a couple of us did this with the sample log, we got the same > > results he did. But, when we did it against our own logs we didn't get > > what we expected. For example, I have 12,000+ QSOs in my log, and only > > got 3,280 QSOs changed, not the 12,213 that I expected. I even tried > > doing a filter before hand, and got the same results. > > > > Guess we have to wait for Paul and Steve to come back from Dayton. > > > > 73 - Ted - W8TTS > > > > > > Rick Murphy K1MU wrote: > > > OK, I'm kinda confused about what to do when importing from LoTW. > > > > > > I've uploaded my log from 6.02, so what I need to do now is two > > > things: 1. Mark the QSOs in my current log as uploaded. 2. Download > > > from LoTW so the confirmations there are marked properly. > > > > > > The help file is less than helpful. There's no "LoTW" in the index, > > > and the "Export for LOTW" topic starts with > > > > > > Export all QSOs marked for upload to an ADIF file. The ADIF file > > > > > > i.e. it ends in the middle of a sentence. > > > > > > For download, do I generate an ADIF report from LoTW for just QSLs, > > > or for all QSOs? Do I import this using an ADIF import, into my > > > current log? > > > > > > How do I mark what I've already uploaded so they don't get uploaded > > > again? -Rick > > > > > > _______________________________________________ Dx4win mailing list > > > [email protected] http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ > > Dx4win mailing list > > [email protected] > > http://mailman.qth.net/mailman/listinfo/dx4win > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win >
